ELK-M1PR M1 Keypad Plug-in Proximity Reader
Allows a proximity card or fob to be used with the M1 Keypad to quickly arm, disarm, operate a door strike, etc.
Plugs into connector on the back of the Keypad. Uses M1PRC cards or M1PRF fobs. Includes 1 prox card.
• Size: 1” Diameter x .5” D
ELK-M1PRC Proximity Card, pack of 10
ELK-M1PRF Proximity Fob, pack of 10
ELK-M1XIN M1 16 Zone Input Expander
Adds 16 hardwired zones (EOL resistor supervised) to M1 Controls. Operates from 4-wire data bus. Up to 12 of
these can be used, increasing total zones (inputs) to 208 on M1 Gold and 200 on M1EZ8.
• Size: 6” W x 3.25” H x 0.75” D
ELK-M1XOV M1 16 Output Expander, Flying Voltage Leads
Adds 16 voltage outputs to M1 Controls. Provides 2 plug-in, 8-pin flying lead connectors for triggering low current
devices (50 mA max. each); such as, LEDs, relays, piezos, etc. Operates from 4-wire data bus. Up to 12 Output
Expanders may be used for a total of 205 outputs on M1 Gold and 204 on M1EZ8. The voltage outputs can be
converted to relays (8 or 16) using (1 or 2) M1RB Relay Board(s).
• Size: 6” W x 3.25” H x 0.75” D
ELK-M1XOVR M1 16 Output Expander, 8 Voltage & 8 Relays
Adds 16 outputs (8 voltage, 8 relays) to M1 Controls. Voltages can be used to trigger low current devices (50 mA
max. each). Relays are SPDT rated for 7A @ 30 VDC, 10A @ 125 VAC. Operates from 4-wire data bus. Up to
12 output expanders may be used for a total of 205 outputs on M1 Gold and 204 on M1EZ8. Option: Convert 8
voltage outputs to relays using M1RB Relay Board.
• Size: 6” W x 3.25” H x 0.75” D
ELK-M1RB M1 Relay Board, Plug-in
May be plugged directly into M1 Controls, M1XOV, or M1XOVR to convert the voltage outputs into SPDT relays
rated for 7A @ 30 VDC, 10A @ 125 VAC.
• Size: 6” W x 3.25” H x 0.75” D
ELK-M1DBH M1 Data Bus Hub
For easy connection of expanders & keypads. The M1DBH accepts up to 9 cables, RJ45 equipped CAT5 or
CAT6, and series connects the data A & B lines so the data bus may be terminated properly. Two or more units
may be interconnected if more than 9 data lines are required. Includes ELK-SWP3 mounting plate.
• Size: 6.5” W x 3” H x 1.25” D
ELK-M1DBHR M1 Data Bus Hub Retrofit
The ELK-M1DBHR is an “active” RS-485 data bus hub designed for jobs where an M1 Control is retrofitting an
older panel that has multiple homerun, 4 conductor, keypad/data wires. It splits the main RS-485 data bus into 4
managed RS-485 branches. Each branch can have 2 parallel home run cables for a total of 8 home runs. The
last device of each cable is EOL terminated to insure proper operation and supervision.
• Size: 2.75” W x .7” H x 3.95” L
ELK-M1XEP M1 Ethernet Port Interface
Control home or business from a PC browser, anywhere! Elk’s Ethernet Port, M1XEP,
allows M1 Controls to be connected to the Internet or LAN (network) for programming,
monitoring, remote control, email notifications, etc. The M1XEP has a built-in web
server, eliminating the need for a local 24/7 PC server. Broadband connection required
for internet access: CableModem, DSL, T1, etc.
• Housing: 4.25" x 6.375" x 2.125" Board: 2.25" x 3.95"
ELK-WO35A M1 Accessory Wire Harness
This 5-pin cable is required for connecting the wireless receivers (models NX408E, 416E, or 448E) to M1
Controls. It can also be used to connect another manufacturer’s proximity reader (26bit Weigand format) to an
M1KP keypad. Wire Length = 18”
ELK-M1EZ8MSI M1EZ8 Main Serial Interface
The main serial interface required for interfacing M1EZ8 with a PC for upload/download. Also required when
adding the M1XEP Ethernet port to an M1EZ8 Control. Baud rate programmable up to 115,200 baud.
Available Accessories
(2 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern